Email: Info@acapulcodeksii.com

   Call Now 817-637-7819

Copyright ©​ Acapulco Deks LLC .

acapulco deks process

  • Remove Mastic on pool perimeter
  • Power / Acid / Turbo / Wash pool perimeter       control joint
  • Allow pool perimeter joint to dry
  •  Replace the Poly Void Moisture Barrier as     required on pool perimeter control joint. 
  • Apply 1/2" of COARSE SAND to joint on pool perimeter control joint. 
  • Apply Mastic 3/4" thick on pool perimeter   control joint.
  • Apply FINE sand finish to Mastic (NOT COARSE or FILTER SAND as this reduces the elasticity)                                  
  •  **Bare mastic is not protected from UV rays**                            
  • Seal the coping with a penetrating sealer
  • 2 year Warranty   ) 
  • ALL COPING SHOULD SEALED TO PROTECT THE BOND BEAM MORTAR REGARD LESS OF TYPE OF COPING !!!!


.

​​​​ Acapulco Deks LLC                           

  Acapulco Fiberglass Pools                                                                   

                               



Mastic is a high grade polyurethane (High Grade Caulk) designed specifically for expansion joints. Mastic allow the Gunite Pool and concrete around the pool to move independently and be aesthetically pleasing. Structurally Mastic is the MOST IMPORTANT aspect of you pool because it protects the bond beam mortar. If mastic is not installed properly it can cost you THOUSANDS in repairs.​

 

MASTIC IS A 2 DAY PROCESS 
DO NOT ALLOW MASTIC TO BE REMOVED AND INSTALLED ON THE SAME DAY​​

ENSURE YOUR MASTIC IS INSTALLED PROPERLY ASK your contractor or pool PROFESSIONAL ...

  • Do you plan to just remove and Install the Mastic?
  • Will the pool perimeter control joint be Power Acid Turbo Washed? 
  • Will any of the Moisture Barrier be replaced if required  
  • Will the mastic be at least 3/4" thick? 
  • Will the sand finish be a FINE sand?
  • Will the coping be seal with a stone penetrating sealer?